Bath wrinkle agent RF-601A-Leather chemicals and textile auxiliaries_AILPSS“澳卢实业发展(上海)有限公司

企业概况 / Company Profile

Bath wrinkle agent RF-601A

ANTICREASANT VPL paste

RF-601A

ANTICREASANT VPL paste系一特殊的防皱剂。 ANTICREASANT VPL paste a special line of wrinkle-free agent. 减少在加工过程中，由于纤维的溶胀异向性引起的织物皱折现象。 Reduction in the process, due to anisotropy caused by swelling of the fiber fabric wrinkle phenomenon. 适用于高支紧密或高加捻的棉针织汗布（特别是并线类和克重大的品种）、汽流纱制品、粘胶纤维等纤维素纤维织物的前处理，染色。 Strong support for high-or high-twist cotton knit jersey (and line classes and especially the great variety of grams), steam products, yarn, viscose fiber and other cellulose fiber fabric pre-treatment, dyeing.

特性： Features:

☆低泡 ☆ low foam

☆在喷射染机中稳定性高 ☆ in the jet dyeing machine stability

☆在高达135℃的高温中，亦不会影响其稳定性 ☆ high temperature up to 135 ℃, the will not affect its stability

☆不含APEO ☆ free APEO

物理特性： Physical Characteristics:

化学组成：脂肪磺酸盐 Chemical composition: fatty sulfonate

离子性：阴离子型 Ion: Anionic

供应形式：黄色浆液 Supply Type: yellow slurry

密度（20℃）：约1克/立方厘米 Density (20 ℃): about 1 g / cc

稀释：分批加入热水打浆稀释 Dilution: dilution batches by adding hot water beating

产品的PH值(20℃)：7-8 PH value of the product (20 ℃) :7-8

1％稀释液的外观：微乳白色 1% dilution Appearance: milky white

产品稳定性：其稀释液对能引起水质硬化的盐类稳定，对高浓度的盐 Product Stability: The diluted solution of salts can lead to hardening of the stability of the water quality of high concentration of salt

（80克/升的氯化钠）稳定 (80 g / l sodium chloride) is stable

相容性：除阳离子型染料的助剂外，能与所有类型的染料和助剂相容 Compatibility: In addition to cationic dye additive, but with all types of dyes and additives compatible

储存：在密封的容器内可储存两年，暴露于严寒之下会增加其粘度或凝结。 Storage: store in a sealed container for two years under exposure to cold will increase its viscosity or coagulation. 加温溶解后可正常使用。 Normal use of heating can be dissolved.

应用上的技术提示： Application of technology tips:

ANTICREASANT VPL paste能防止绳状织物在前处理（煮练/煮漂），染色及后处理中产生的折皱。 ANTICREASANT VPL paste to prevent the rope-like fabric in the former treatment (boiling / scouring and bleaching), dyeing and processing of produce wrinkles. 适用于由全棉针织汗布或粘胶纤维及其混纺织物制成的针织和机织品。 Applies to cotton knitted jersey or viscose rayon and blended fabric, knitted and woven fabrics.

ANTICREASANT VPL paste不适合用于以阳离子染料对100％的腈纶进行染色之中，但可用于以（阴离子/阳离子）混合染色工艺对腈纶混纺织物进行染色。 ANTICREASANT VPL paste is not suitable for 100% of cationic dyes on dyeing of acrylic into, but can be used to (anion / cation) mixed blended fabric dyeing process for dyeing acrylic.

ANTICREASANT VPL paste具有很好的防皱性。 ANTICREASANT VPL paste has good crease resistance. 因此在拉缸中，缝纫封口可不采用。 Therefore, cylinder, the seal may use sewing. 用量避免过多，否则会对染料产生防染作用，其程度根据所用的染料而定。 Avoid excessive dosage, or will have anti-dyeing dye effect, according to the extent determined by the dye.

ANTICREASANT VPL paste适用于所有染色机械，包括喷射染机，其只有微弱的均染效果和分散效果。 ANTICREASANT VPL paste applied to all dyeing machinery, including jet dyeing machines, dyeing effects are only weak and dispersion. 关于这方面可选用LEVELLANT系列均染剂和分散剂。 In this regard the choice LEVELLANT series leveling and dispersing agent.

先使ANTICREASANT VPL paste在染浴中运行5—10分钟，可获得最佳的效果。 ANTICREASANT VPL paste the first to run in the dye bath for 5-10 minutes, for best results. 这种方法可产生最佳的滑爽效果，获得非常好的柔软滑爽性。 This method can produce the best results smooth, soft and smooth access to a very good sex.

用量： Dosage:

根据织物类型和重量以及浴比：0.1-0.5克/升ANTICREASANT VPL paste According to the fabric type and weight, and 0.1-bath than 0.5 g / l ANTICREASANT VPL paste

我公司无论在口头上，书面上或试验上所提供的技术意见均出自诚意，但不作保证，这亦适用于牵涉到第三者的所有权问题。 My company, whether verbally, in writing, or test on the technical advice provided are from good faith, but is not guaranteed, it is also applicable to the ownership of a third party involved. 用户对我公司供应的产品，亦有责任进行试验，以验证是否适合所拟订的工艺和用途。 Users of products supplied by our company, also responsible for testing to verify the process for the preparation and use. 由于对我公司产品所进行的运用，用途和工艺均非我公司所能控制，因而应全由用户本身负责。 Because our products are for the use, purpose and process are beyond our control, which should be entirely your own responsibility. 虽然如此，如仍有任何损失须由我公司负责，亦只限于我公司已交用户经使用的那部分货品的价值而已。 Even so, if I still be responsible for any loss, confined to our company has to pay that part of the user by using the value of goods only. 在我公司的一般售货及交货条件范围内，我方当然要供应品质一致的产品。 In my company's general sales and delivery conditions within the scope of our course to supply consistent quality products.

VPL浆化料步骤 VPL step slurry material

操作方法 How-to

第一步：先将0.5或1倍于VPL浆重量的热水加入于VPL浆中搅拌混合，同时升温至80-90℃，搅拌至均匀。 Step one: first 0.5 or 1 times the weight of the hot plasma VPL VPL join the slurry mixing, while heating to 80-90 ℃, stir until uniform.

第二步：然后分批分时加入少量的冷水，同时保温（80-90℃）并搅拌至均匀在由浆状转为粘度较小的液体时，再加入冷水至刻度并搅拌均匀。 Step two: and then sharing a small amount of cold water in batches, while insulation (80-90 ℃) and stir until evenly into low viscosity in the slurry when the liquid, then add cold water to the mark and mix well.

第三步：过滤，装桶。 The third step: filtering, loading barrels.

推荐配比用量：10-30％（每10-30公斤VPL浆配制成100公斤成品） Recommended dosage ratio :10-30% (10-30 kg per 100 kg VPL pulp made into finished products)